Access the entire Evaluation Kit Quik-Start User's Guide in PDF format.

General Description The SMT4004EVAL kit is a fully functional evaluation board designed to demonstrate the features of the SMT4004 Nonvolatile, Quad Power Supply Tracking Controller. The EVAL board manages up to 4 unique input voltage levels ranging from 0.9V to 5.5V; deriving its power from the highest input (> 2.7V). Unlike similar products; the SMT4004 features on-board nonvolatile memory, making it truly 'User-Programmable'.

Several key, user-configurable functions are: 1) Power up/down management. 2) User-Settable Voltage/Current set points with fault outputs (RST 1#-RST 4#, IRQ#, etc.) on both bus and card-sides. 3) Undervoltage/Overvoltage (UV/OV) fault monitoring (20mV increments). 4) Programmable IRQ, Reset output pulse widths. 5) Programmable Watchdog/Longdog timers.
SMT4004 Evaluation Board		Additional features included on the EVAL board: • User-Programmable interface to digitally control analog supervisory functions. • LED visual indicators (13). • Master Reset (MR) & IRQ_CLR momentary • EZ-connect power and signal pins. • SMT4004 48-pin TQFP in a spring-loaded socket for convenient prototyping and evaluation. Evaluation Kit Contents 1) Fully Functional SMT4004 Evaluation Board. 2) SMT4004 Evaluation Kit User's Guide. 3) SMX3200 Dongle Programmer Interface Card. 4) Dongle to I2C Interface Cable (1 meter). 5) One CD-ROM or floppy disk containing: SMT4004 EV Gerber Files, GUI Software, Hex file, SMX3200 Dongle schematic, relevant Application Notes/Briefs, Windows GUI User's Guide.  Contact your sales rep to order an eval kit. U.S. and Canadian Reps | International Reps

 

SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained herein reflect representative operating parameters, and may vary depending upon a user's specific application. While the information in this publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or omission. SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness. Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc. is adequately protected under the circumstances. Revision J - This document supersedes all previous versions. I2C is a trademark of Philips Corporation.