SUMMIT Microelectronics: SMX3203 Programming Kit  






SMX3203 PDF download

Download/View this entire Programming Kit Quik-Start User's Guide PDF.

SMX3203 User's Guide Table of Contents:
• Operating Instructions (Pg. 2, 3)
• USB2I2C Schematic (Pg. 4)
•

Layout Drawings (Pg. 5)
•

Bill of Materials (vendor sources) (Pg. 6)
•

Comments & Precautions (Pg. 6)
•

USB2I2C Programmer Dongle pinout (Pg. 7)

SMX3203 Kit Contents:
1.

SMX3203 Programming Kit User's Guide.
2.

USB2I2C Programming Dongle.
3.

USB Interface Cable (1 meter).

Summit Microelectronics: SMX3203 USB-to-I2C Programming Dongle Board
Figure 1: SMX3203 USB-to-I2C Programming Dongle Board. The USB Dongle provides 5V to Read/Write devices. There is no need for an external supply.

Figure 2: USB-to-I2C Programming Cable.

Features included on the USB2I2C board:
• User-Programmable Interface connector to digitally control power supply voltages, sequencing, etc.
• Power Status Indicator (LED) included on board.
• USB supply 5V@500mA to power programmable device and board.
• USB-B Port connector.
Connects to standard PC USB 2.0 A/B cable

  SMX3203 USB2I2C Programming Kit Quick-Start User’s Guide

 
SMX3203 Supported devices
SMB109   Multi-Output SMBus/I2C Programmable Power Manager with Digital Power Control
207/A   Single/Dual Programmable Buck Regulators with Integrated MOSFETs and Digital Control
208/A   Single/Dual Programmable Buck Regulators with Integrated MOSFETs and Digital Control
209/A   Single/Dual Programmable Buck Regulators with Integrated MOSFETs and Digital Control
SMB274   Programmable Driver for LensVector AutoFocus (LVAF) Devices
SMB136   Programmable Switching Li+ Battery Charger with USB/AC Input, CurrentPath™ Manager, TurboCharge™ Mode, Low Battery Recovery, AICL and USB On-The-Go Support
SMB137B   Programmable Switching Li+ Battery Charger with USB/AC Input, CurrentPath™ Manager, TurboCharge™ Mode, Low Battery Recovery, AICL and USB On-The-Go Support
SMB211   Programmable Power Manager with Digital Power Control
SMB212   Programmable Power Manager with Digital Power Control
SMB329B   Programmable Switch-mode, Li+ Battery Charger with TurboCharge™ Mode, USB “On-the-Go” Power, USB Power Source Detection and Automatic Input Current Limiting
SMB328A   Programmable Switch-mode, Li+ Battery Chargers with TurboCharge™ Mode, USB “On- the-Go” Power, Battery Missing Detection and Automatic Input Current Limiting
SMB328B   Programmable Switch-mode, Li+ Battery Chargers with TurboCharge™ Mode, USB “On- the-Go” Power, Battery Missing Detection and Automatic Input Current Limiting
SMM665B/C   (Coming Soon)
SMM766/B   (Coming Soon)


GENERAL DESCRIPTION

The SMX3203 USB programming system is used for device prototype development. The SMX3203 system consists of a programming Dongle, USB cable and WindowsTM GUI software. It can be ordered on the website or from a local representative. The latest revisions of all software is available from the website (http://www.summitmicro.com).

The SMX3203 programming Dongle (Figure 1) and cable (Figure 2) interface directly between a PC’s USB port and the target application. The device is then configured on-screen via an intuitive graphical user interface employing drop-down menus.

The Windows GUI software will generate the data and send it in I2C serial bus format so that it can be directly downloaded to the target device via the programming Dongle and cable. An example of the connection interface is shown in Figure 3.



[continues in the PDF]
  



SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained herein reflect representative operating parameters, and may vary depending upon a user’s specific application. While the information in this publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or omission.

SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness. Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc. is adequately protected under the circumstances.

Revision A - This document supersedes all previous versions.

• ADOC™ is a trademark of Summit Microelectronics,Inc.
• I2C is a trademark of Philips Corporation.

 
Summit Home Page Product Index Page
 
 Copyright©1999- Summit Microelectronics, Inc.