SPECIAL NOTE: The HTML version of the application note has been divided into multiple pages to follow the PDF version. You may click on a page number (below) to jump to another other page. You may also download/view the entire application note in PDF format [PDF format].

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Next -->

SMS64 SIX-CHANNEL SUPPLY MONITOR AND SEQUENCING CONTROLLER Windows GUI Users Guide and Configuration Register Descriptions

PAGE 4

Register R06, R07, R08, R09, R0A, R0B - Enables sequencing, power on/off delay and sequence position for Channel A, B, C, D, E and F.

Register 06 THRU 0B controls the sequencing function for Channel A,B,C,D,E and F. The contents also determines the sequence power on/off time delay and the sequence position.
  

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

Next -->

SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained herein reflect representative operating parameters, and may vary depending upon a user's specific application. While the information in this publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or omission. SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness. Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc. is adequately protected under the circumstances. Revision 1.1 - This document supersedes all previous versions and covers Status Tracking Codes up to 01 and Windows GUI revision 2.3.0 and later. Please check the Summit Microelectronics, Inc. web site at www.summitmicro.com for data sheet updates.