Summit Microelectronics - Applications Note 28

Tech Support: Applications Note 28
SMT4214 Expandable Four-Rail Supply TRAKKER™ Controller, Windows GUI and Configuration Register Descriptions

Application Note 28

1 2 3 4 5 6 7 8 9 10

SPECIAL NOTE: The HTML version of the application note has been divided into multiple pages to mimic the PDF version. You may use the menu here or at the bottom of the page to jump to any of the other pages. You may also download/view the entire application note in PDF format [PDF format].

WINDOWS GUI USERS GUIDE AND CONFIGURATION REGISTER DESCRIPTIONS

PAGE 10

Register R12 - STATUS TRACKING CODE Identification Register 12 is a read only register that identifies the "STATUS TRACKING CODE" of the SMT4214. This is accomplished by reading register 12, bits D0 and D1. The command to do this is available in the Configuration pull down menu. An additional Window will appear with further information regarding the Status Tracking Code.

Summit Application Note 28 Figure 11

Figure 11 - Register R12 Windows GUI

Application Note 28

1 2 3 4 5 6 7 8 9 10

NOTICE

SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained herein reflect representative operating parameters, and may vary depending upon a user's specific application. While the information in this publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or omission.

SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness. Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc. is adequately protected under the circumstances.

Revision 1.0 - This document supersedes all previous versions and covers Status Tracking Codes up to 01 and Windows GUI revision 2.3.0 and later. Please check the Summit Microelectronics, Inc. web site at www.summitmicro.com for data sheet updates.

return to top

home

technical support