SUMMIT Microelectronics: Product Guide: S24163 Product Summary

A complete index to all Product Summary pages   Download the entire S24163 data sheet Download SMX3199 programming module for this device   Would you like to evaluate a sample?

S24163 BLOCK DIAGRAM   S24163 PIN CONFIGURATION

REQUEST A SAMPLE: Click here to request a sample to evalute.

 

S24163 - 3 and 5 volt systems Precision RESET Controller with 16k I2C™ Memory FEATURES Precision Supply Voltage Monitor Active Low Integrated memory write lockout Guaranteed RESET Assertion to VCC=1V Power-Fail Accuracy Guaranteed No External Components 3V and 5V system versions Low Power CMOS Active current less than 3mA Standby current less than 25µA Memory Internally Organized 2k x 8 Two Wire Serial Interface (I2C™) Bidirectional data transfer protocol Standard 100KHz and Fast 400KHz High Reliability Endurance: 1,000,000 erase/write cycles Data retention: 100 years 8-Pin SOIC Packages

OVERVIEW The S24163 is a power supervisory device with 16,384 bits of serial E2PROM. It is fabricated using SUMMIT's advanced CMOS E2PROM technology and is suitable for both 3 and 5 Volt systems. The S24163 is internally organized as 2048 x 8. It features the I2C serial interface and software protocol allowing operation on a simple two-wire bus. [continued in the PDF]

SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained herein reflect representative operating parameters, and may vary depending upon a user’s specific application. While the information in this publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or omission. SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness. Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc. is adequately protected under the circumstances. Revision 2.1 - This document supersedes all previous versions. Please check the Summit Microelectronics, Inc. web site at www.summitmicro.com for data sheet updates. I2C is a trademark of Philips Corporation.